指標中帶無未來函數，有的地方的提示有一定容錯率，其實用波段技術完全可以趨利避害。

先來看指標模樣效果自己驗證

選股回測多半是成功且是妖股的，不過需要篩選，我想對你聰明的你來說這不是問題

源代碼如下：【不能通過的是因為空格問題，代碼無錯】

主圖指標

LTP:=CAPITAL/1000000;

去ST:=NAMELIKE('ST')=0 AND NAMELIKE('*ST')=0 AND NAMELIKE('SST')=0 AND NAMELIKE('S*ST')=0;

去除停牌:=DYNAINFO(4)>0;

去:=去ST AND 去除停牌 AND LTP<15;

莊家籌碼1:=(COST(75)-COST(25))/(COST(75)+COST(25))*100;

獲利籌碼2:COST(莊家籌碼1)*1.28,COLORGREEN;

成本籌碼3:COST(莊家籌碼1)*0.98,COLORCYAN;

突破:=CROSS(C,獲利籌碼2);

龍頭基礎1:=REF(C/REF(C,1)>1.09 AND C=H,1) AND COUNT(REF(C/REF(C,1)>1.09 AND C=H,1),6)<=2 AND REF(C<40,1) ;

龍頭基礎2:=DYNAINFO(15)/OPEN/FINANCE(46)*100; 

龍頭基礎3:=龍頭基礎1 AND 龍頭基礎2>0.18;

DRAWTEXT_FIX(1,0,70,0,'~★~天天大漲公眾號~★~'),COLOR00FFFF;

籌碼尋龍:=突破 AND REF(C/REF(C,1)>1.09 AND C=H,1) AND 龍頭基礎3 AND 去;

DRAWTEXT(突破,LOW*0.93,'▲突破'),COLORYELLOW;

STICKLINE(籌碼尋龍,O,CLOSE,4.5,0),COLORLIMAGENTA;

DRAWTEXT(籌碼尋龍,LOW-0.025*LOW,'**籌碼尋龍'),COLORCYAN;

副圖源碼:

LTP:=CAPITAL/1000000;

去ST:=NAMELIKE('ST')=0 AND NAMELIKE('*ST')=0 AND NAMELIKE('SST')=0 AND NAMELIKE('S*ST')=0;

去除停牌:=DYNAINFO(4)>0;

去:=去ST AND 去除停牌 AND LTP<15;

莊家籌碼1:=(COST(75)-COST(25))/(COST(75)+COST(25))*100;

獲利籌碼2:=COST(莊家籌碼1)*1.28;

成本籌碼3:=COST(莊家籌碼1)*0.98;

突破:=CROSS(C,獲利籌碼2);

龍頭基礎1:=REF(C/REF(C,1)>1.09 AND C=H,1) AND COUNT(REF(C/REF(C,1)>1.09 AND C=H,1),6)<=2 AND REF(C<40,1) ;

龍頭基礎2:=DYNAINFO(15)/OPEN/FINANCE(46)*100; 

龍頭基礎3:=龍頭基礎1 AND 龍頭基礎2>0.18;

ADD1:='【天'; ADD2:='天大'; ADD3:='漲】'; WEB:=STRCAT(STRCAT(ADD1,ADD2),ADD3);DRAWTEXT_FIX(1,0.125,0.0,2,STRCAT('獲取更多指標關注：公眾號', WEB)); 

籌碼尋龍:=突破 AND REF(C/REF(C,1)>1.09 AND C=H,1) AND 龍頭基礎3 AND 去;

STICKLINE(籌碼尋龍,0,40,5,0),COLORLIMAGENTA;

DRAWTEXT(籌碼尋龍,35,'*▲籌碼尋龍'),COLORCYAN;

選股源碼：

LTP:=CAPITAL/1000000;

去ST:=NAMELIKE('ST')=0 AND NAMELIKE('*ST')=0 AND NAMELIKE('SST')=0 AND NAMELIKE('S*ST')=0;

去除停牌:=DYNAINFO(4)>0;

去:=去ST AND 去除停牌 AND LTP<15;

莊家籌碼1:=(COST(75)-COST(25))/(COST(75)+COST(25))*100;

獲利籌碼2:=COST(莊家籌碼1)*1.28;

成本籌碼3:=COST(莊家籌碼1)*0.98;

突破:=CROSS(C,獲利籌碼2);

龍頭基礎1:=REF(C/REF(C,1)>1.09 AND C=H,1) AND COUNT(REF(C/REF(C,1)>1.09 AND C=H,1),6)<=2 AND REF(C<40,1) ;

龍頭基礎2:=DYNAINFO(15)/OPEN/FINANCE(46)*100; 

龍頭基礎3:=龍頭基礎1 AND 龍頭基礎2>0.18;

籌碼尋龍:突破 AND REF(C/REF(C,1)>1.09 AND C=H,1) AND 龍頭基礎3 AND 去;